Project ReadyOP·001
Sàn hèm khóa lõi cứng SPC
Hệ sàn cứng cho khí hậu ẩm, cải tạo nhanh và giao dự án tiêu chuẩn hóa.
VietnamIndonesiaThailandMalaysia
SPC ≠ WPC · Board moisture resistance ≠ waterproof floor system
01
Nhận biết nhanh
02
Vì sao là cơ hội
Nhu cầu, khí hậu, nguồn cung, khả năng triển khai, thương mại và tuân thủ phải được xem xét cùng nhau.
SPC supports coordinated floor and interior-wall systems where projects need durable finishes, rapid refurbishment and a broad design language.
- Rigid mineral-polymer core rather than a wood-fibre-dominant core.
- Floating floor installation can reduce wet trades and waiting time.
- Purpose-designed wall panels extend the same visual language vertically.
- The opportunity is targeted—not a claim that SPC replaces tile or exterior cladding everywhere.
03
Phân tích cơ hội
4/5
Nhu cầu thị trường
UBI market assessment
4/5
Phù hợp khí hậu
UBI market assessment
5/5
Dải thiết kế
UBI market assessment
4/5
Phù hợp dự án
UBI market assessment
4/5
Tiềm năng thương mại
UBI market assessment
3/5
Độ phức tạp tuân thủ
Chờ xác minh
UBI preliminary market judgement. It is not an investment-return guarantee.
04
So sánh lựa chọn
No material is universally superior; selection depends on exposure, substrate, programme, service life and maintenance.
| System | Moisture | Installation | Typical project | Key caveat |
|---|---|---|---|---|
| SPC | Strong board-level resistance | Fast floating click installation | Residential, hotel, office and retail refurbishment | Harder underfoot; substrate and heat still matter |
| Laminate | Core quality dependent | Fast | Dry residential and light commercial interiors | Wood-fibre cores may swell after moisture exposure |
| Ceramic tile | Excellent system potential when detailed | Slower wet trade | Wet areas, heavy wear and long service life | Heavier, slower refurbishment and harder replacement |
| WPC | Product dependent | Fast | Comfort-led interiors | Softer foamed core; not the same product as SPC |
| LVT | Strong material resistance | Glue-down preparation can take longer | Large commercial layouts and design flexibility | Subfloor telegraphing and adhesive system matter |
SPC cannot universally replace tile. Wet rooms, outdoor areas, high-temperature zones and heavy loads require separate assessment. Board-level water resistance does not make the whole floor assembly waterproof.
05
Ứng dụng
Each major use case now has its own original application image. Images illustrate design intent and are not claimed completed projects.
FLOOR SYSTEM · Market Reference
Hotel guest room
Guest rooms and dry corridors after traffic, slip, fire and VOC review.
FLOOR SYSTEM · Market Reference
Office & studio
Open office, meeting and reception zones with suitable castor and wear performance.
FLOOR SYSTEM · Market Reference
School classroom
Classrooms and training rooms subject to fire, slip, VOC, acoustics and furniture-load evidence.
FLOOR SYSTEM · Pending Verification
Hospital support zone
Administration, waiting and non-special support areas only; not sterile, wet-treatment or operating zones.
FLOOR SYSTEM · Market Reference
Urban apartment
Living, dining and bedroom areas with an indoor/outdoor threshold and controlled solar exposure.
FLOOR SYSTEM · Market Reference
Public & affordable housing
Standardized dry interiors where batch colour, replacement stock, VOC and warranty are documented.
Residential
- Living rooms
- Bedrooms
- Rental apartments
- Show homes
Hospitality
- Guest rooms
- Corridors
- Serviced apartments
- Staff accommodation
Commercial & institutional
- Offices
- Retail
- Classrooms and training rooms
- Hospitals—administration and non-special clinical support areas
Public & affordable housing
- Standardized apartment interiors
- Bedrooms and living areas
- Rapid turnover refurbishment
- Projects with documented VOC and wear requirements
Not recommended without specific design review
Ordinary grades outdoors · Long-term standing water · Pool surrounds and commercial kitchens · Heavy forklift or aggressive chemical areas · Unmitigated strong solar exposure
06
Khí hậu Đông Nam Á
High humidity, monsoon rain, condensation, coastal exposure, solar gain and substrate moisture must be considered as a system.
High humidity and seasonal moisture
- Lợi thế tiềm năng
- The rigid mineral-polymer core is not primarily wood fibre and generally resists moisture-related swelling better than ordinary laminate cores.
- Giới hạn
- Moisture may still be trapped below a floating floor; joints, walls and subfloors are not automatically waterproof.
- Khuyến nghị
- Test slab moisture, provide the specified vapour control layer, keep expansion gaps and investigate any water ingress promptly.
Solar gain and high temperature at glazing
- Lợi thế tiềm năng
- Qualified products can offer useful dimensional stability in controlled interiors.
- Giới hạn
- Strong direct sun and rapid thermal cycling can still cause movement, gapping or distortion.
- Khuyến nghị
- Assess solar exposure, use shading, confirm heat-stability test data and provide movement zones for large areas.
Ground-floor and below-grade moisture
- Lợi thế tiềm năng
- Floating installation can reduce wet trades and allow rapid fit-out.
- Giới hạn
- A rigid board cannot correct a damp, uneven or contaminated substrate.
- Khuyến nghị
- Check flatness and moisture, repair the slab, use approved moisture control and never trap active dampness.
07
Cấu trúc
An original system diagram of the typical assembly; exact supplier construction must be confirmed.
1UV surface coating
2Transparent wear layer
3Printed décor film
4Rigid SPC core
5Balance layer
6IXPE acoustic backing
01UV surface coating
Wear, stain and gloss control; performance depends on formulation and cure.
02Transparent wear layer
A key determinant of wear suitability; project evidence required.
03Printed décor film
Carries wood, stone, terrazzo, carpet or concrete visuals.
04Rigid SPC core
Mineral-filled polymer core providing rigidity and click profile.
05Balance layer
Supports dimensional balance and back-side performance.
06IXPE acoustic backingOptional
Optional pre-attached layer for comfort and impact-sound improvement.
08
Nguyên liệu
Rigid core
- PVC resin
- Calcium carbonate
- Stabilizers and lubricants
- Processing and impact modifiers
Surface system
- UV-cured coating
- Transparent wear layer
- Printed décor film and embossing
Backing & accessories
- Balance layer
- Optional IXPE or EVA
- Specified vapour control layer
Specific formulation, proportions and chemical content must follow manufacturer technical data, SDS and third-party reports.
09
Sản xuất
- 01Raw-material weighing
- 02Hot and cold mixing
- 03Extrusion and plasticisation
- 04Calendering or lamination
- 05Surface lamination and UV curing
- 06Conditioning and cutting
- 07Profiling, click machining and bevel
- 08Optional backing lamination
- 09Inspection and packaging
Quality control that materially affects results
Formula stability and internal stress · Heat shrinkage, thickness and flatness · Click precision and toughness · UV adhesion and batch colour · VOC, odour and restricted substances · Backing adhesion and transport deformation
10
Bộ sưu tập
Five coordinated design families and 26 named directions, informed by the breadth and presentation logic of professional rigid-core collections. Final décor films, embossing and batch colour require physical sample approval.
Oak spectrum
Quiet Nordic lights through smoked and fumed darks, with matte registered embossing.
- OW-01Limestone OakPale neutral
- OW-02Natural Atelier OakLight warm
- OW-03Honey Smoked OakMid warm
- OW-04Mocca OakMid dark
- OW-05Walnut OakDeep warm
- OW-06Fumed Charcoal OakDeep cool
Mineral stone
Large-format limestone, travertine, marble, slate and sandstone references for floors and approved wall panels.
- ST-01Pale LimestoneSoft ivory
- ST-02Warm TravertineWarm sand
- ST-03Silver VeinCool white
- ST-04Graphite SlateDark mineral
- ST-05Greige SandstoneBalanced greige
Terrazzo studio
Fine and medium aggregate visuals for education, hospitality, retail and residential schemes.
- TZ-01Ivory ConfettiLight neutral
- TZ-02Desert AggregateWarm beige
- TZ-03Sage MineralMuted green
- TZ-04Clay StudioRose clay
- TZ-05Night AggregateCharcoal multicolour
Textile relief
Low-glare woven textures for wall features and selected low-contrast flooring concepts.
- TX-01Linen WhiteWarm light
- TX-02Bouclé GreigeSoft greige
- TX-03Moss WeaveMuted green
- TX-04Ink CrosshatchDeep blue black
- TX-05Charcoal FeltCharcoal
Architectural concrete
Calm microcement and trowelled concrete references from chalk white to graphite.
- CN-01Chalk ConcreteOff white
- CN-02Warm MicrocementWarm greige
- CN-03Gallery GreyMid neutral
- CN-04Clay CementMuted earth
- CN-05Graphite FormworkDeep grey
11
Thông số
System scopeSPC rigid-core floor plus purpose-designed SPC interior wall-panel optionManufacturer Declared
Floor product standardSelect product tested to the applicable resilient / rigid-core standard for the destination marketPending Verification
Total thicknessProject selection required; exact nominal and tolerance from final TDSPending Verification
Wear layerSelect by traffic class, abrasion evidence and warrantyPending Verification
Plank / tile formatWood plank, herringbone plank and large-format tile options; supplier confirmation requiredManufacturer Declared
Wall-panel formatLarge-format vertical panels or approved click panels; exact size and weight from wall-system TDSManufacturer Declared
Core compositionMineral-filled polymer rigid core; exact formulation and recycled content require declarationManufacturer Declared
Core densitySupplier declaration plus batch verification requiredPending Verification
Surface treatmentUV-cured coating with project-selected gloss, stain and scratch performanceManufacturer Declared
EmbossingWood, stone, terrazzo, textile or concrete embossing; EIR available by supplierManufacturer Declared
BevelSquare, micro-bevel or painted bevel by collectionManufacturer Declared
Floor locking systemFour-sided click profile; licensed profile and pull-strength evidence to be nominatedPending Verification
Acoustic backingOptional IXPE/EVA; thickness, adhesion and acoustic report must match the offered SKUPending Verification
Use classificationSelect by domestic, commercial or industrial traffic and destination-market standardPending Verification
Dimensional stabilityCurrent product-specific heat and dimensional-stability report requiredPending Verification
Thickness swell / water exposureBoard result does not establish waterproof joints or assembly; product-specific report requiredPending Verification
Reaction to fireProject-required floor and wall classifications must be verified separatelyPending Verification
Slip resistanceDry/wet test method and declared result must match the use zonePending Verification
Static load & residual indentationVerify for furniture, partitions, hospital equipment and commercial usePending Verification
Castor-chair resistanceProduct-specific test required for offices and schoolsPending Verification
Impact soundAssembly-specific laboratory result required; backing-only claims are insufficientPending Verification
Underfloor heatingOnly within manufacturer temperature limits and approved floor build-upPending Verification
VOC / indoor air qualityCurrent third-party certificate for the exact manufacturing site and SKUPending Verification
Phthalates, heavy metals & formaldehydeDestination-market restricted-substance reports requiredPending Verification
Wall substrateFlat, sound, clean, dry and compatible with the specified adhesive/fixing systemManufacturer Declared
Wall fixingManufacturer-approved full-spread/strip adhesive and/or mechanical fixing with edge trimsManufacturer Declared
Wet-wall detailingPrepared waterproof substrate plus sealed joints, corners, penetrations and terminationsManufacturer Declared
Exterior exposureNot included unless a separate façade/weathering system is tested and warrantedPending Verification
Packaging & batch controlCarton quantity, pallet loading, batch colour and spare-stock plan from final supplierPending Verification
WarrantySeparate floor and vertical-use warranties, exclusions and maintenance conditions requiredPending Verification
12
Đánh giá cân bằng
Potential advantages
- Moisture performance is generally stronger than ordinary wood-fibre core flooring
- Click installation can reduce wet trades and programme time
- Suitable for selected renovation over sound existing tile
- Wide visual range and straightforward routine cleaning
- Coordinated floor, wall-panel and skirting concepts can create a complete interior system
Real constraints
- Usually harder underfoot than timber and WPC
- Cannot be repeatedly sanded like solid timber
- Poor locks can chip or fatigue on uneven substrates
- Heat and intense sunlight can drive distortion
- Environmental claims require VOC, heavy metal and phthalate evidence
13
Tuổi thọ & bảo hành
- Expected service life is not a warranty promise
- Limited warranty depends on supplier terms and exclusions
- Project-specific warranty must be agreed in the contract
14
Lắp đặt & bảo trì
Before installation
- Check slab moisture and flatness
- Confirm temperature and site acclimation
- Plan setting-out and expansion zones
During installation
- Use the specified vapour layer
- Maintain perimeter gaps and doorway transitions
- Do not trap floating floors below fixed cabinets
After installation
- Use furniture pads and suitable castors
- Protect strong solar-exposure zones
- After flooding, dismantle and dry the substrate promptly
15
Hệ tường nội thất
SPC can be specified vertically when the selected product is engineered, tested and warranted as a wall panel system.
VERTICAL SYSTEM · Manufacturer Declared
SPC interior wall panel system
SPC flooring and SPC wall panels may share a mineral-polymer core, but they are not automatically interchangeable. Wall use needs a panel format and fixing method approved for vertical installation.
- Hotel lobbies, guestrooms and corridors
- Apartment feature walls and headboards
- Office reception and meeting rooms
- Retail and commercial interiors
- Manufacturer-rated bathroom wet walls
- Flat, sound, clean and dry substrate
- Specified adhesive and/or mechanical fixing
- Defined joint, corner, penetration and edge details
- Project fire, VOC and impact evidence
- Wet-area waterproof substrate and sealed system where applicable
- Vertical-use warranty from the selected manufacturer
- Do not assume ordinary floating floor planks are wall-rated
- Not for exterior façades unless separately weather-tested and warranted
- Do not rely on the finish panel as the sole waterproofing layer
- Wet walls require sealed manufacturer details around every joint and penetration
WALL SYSTEM · Manufacturer Declared
Hotel reception wall
Large-format interior wall panels with specified substrate, adhesive, joints and edge trims.
WALL SYSTEM · Manufacturer Declared
Apartment feature wall
Purpose-designed wall panel, not an assumed reuse of a floating floor plank.
WALL SYSTEM · Pending Verification
Office reception wall
Commercial interior feature walls subject to fire, impact and fixing-system review.
WALL SYSTEM · Pending Verification
Bathroom wet-wall system
Only a manufacturer-rated wet-wall panel system with sealed joints, corners, penetrations and prepared waterproof substrate; the shower floor remains non-slip tile.
16
Thị trường ưu tiên
Vietnam
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Indonesia
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Thailand
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Malaysia
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Philippines
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Singapore
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
Cambodia
- Demand driver
- Residential, hospitality and refurbishment demand
- Entry route
- Importer, distributor, contractor and project specification
- Risk
- Certification and import research update in progress
17
Chuỗi quyết định
Developer and hotel ownerArchitect and interior designerEPC, main contractor and fit-out contractorImporter, distributor and installerProject procurement team
- 1Project brief
- 2Design selection
- 3Sample approval
- 4Technical review
- 5Quotation and mock-up
- 6Commercial terms
- 7Production and inspection
- 8Logistics and installation
- 9Handover and after-sales
18
Dịch vụ UBI
01Product–project matching
02Multi-factory quotation
03Samples and mock-up coordination
04BOQ and specification matching
05OEM / ODM
06Quality inspection
07Certification review
08Cross-border logistics
09Customs-document coordination
10Local partner cooperation
19
Tham chiếu dự án
Tropical hotel guest room
Typical Southeast Asian application scenario—not a claimed completed project.
Serviced apartment rapid refurbishment
Use case for feasibility discussion; project evidence not yet supplied.
20
Tài liệu & chứng nhận
Technical DatasheetTBC · Chờ nhà cung cấp
Pending VerificationInstallation GuideTBC · Chờ nhà cung cấp
Pending VerificationMaintenance GuideTBC · Chờ nhà cung cấp
Pending VerificationWarrantyTBC · Chờ nhà cung cấp
Pending VerificationFire TestTBC · Chờ nhà cung cấp
Pending VerificationSlip ResistanceTBC · Chờ nhà cung cấp
Pending VerificationVOC / Indoor Air QualityTBC · Chờ nhà cung cấp
Pending VerificationHeavy MetalsTBC · Chờ nhà cung cấp
Pending VerificationPhthalatesTBC · Chờ nhà cung cấp
Pending VerificationFormaldehydeTBC · Chờ nhà cung cấp
Pending VerificationSDSTBC · Chờ nhà cung cấp
Pending VerificationEPDTBC · Chờ nhà cung cấp
Pending VerificationPackaging DataTBC · Chờ nhà cung cấp
Pending VerificationProject Submittal TemplateTBC · Chờ nhà cung cấp
Pending Verification21
Câu hỏi thường gặp
01Is SPC the same as WPC?
No. This page concerns a dense rigid SPC core. WPC commonly refers to a different, foamed composite core with a softer feel.
02Can SPC replace tile?
Not universally. Tile remains more appropriate for many wet, outdoor, high-temperature and heavy-duty conditions.
03Is an SPC floor waterproof?
The board can be highly moisture resistant, but that does not make joints, walls, penetrations and the full floor assembly waterproof.
04Can it be installed over existing tile?
Sometimes, if the tile is sound, clean, dry and flat and transitions remain workable. Follow the selected manufacturer's requirements.
05Is ordinary SPC suitable outdoors?
Generally no. Rain, solar gain, thermal cycling, drainage and substrate moisture require an outdoor-rated system with product-specific weathering, heat-stability and slip evidence.
06Is SPC suitable for schools, hospitals and public housing?
It can suit classrooms, offices, ordinary residential areas, hotel rooms and non-special hospital support areas when wear, fire, slip, VOC, cleaning and substrate requirements are verified. Laboratories, sterile rooms, wet treatment areas, commercial kitchens and heavy workshops need a different project-specific system.
07Can SPC be installed on a wall?
Yes—SPC is available as a purpose-designed interior wall-panel system. Select a product approved for vertical use, then follow its substrate, adhesive or mechanical fixing, joint, edge, fire and warranty requirements. Do not assume every floating floor plank is automatically wall-rated.
08How should environmental performance be judged?
Review current third-party VOC, heavy-metal, phthalate and other relevant reports for the exact product—not general marketing claims.
09Can UBI coordinate samples and OEM?
UBI can coordinate project samples, supplier comparison and OEM/ODM requirements subject to supplier confirmation.
22
Nguồn & tuyên bố
Nguồn
RFCI — Rigid CoreAccessed 2026-07-11RFCI — Resources & ASSURE certificationAccessed 2026-07-11Shaw — Resilient Installation Guidelines for SPC ProductsAccessed 2026-07-11Karndean — Rigid Core Installation Format and CollectionsAccessed 2026-07-11Karndean — Korlok Select Technical Data SheetAccessed 2026-07-11Tarkett — Elegance Rigid 55 SPCAccessed 2026-07-11Vilo — SPC Wall PanelsAccessed 2026-07-11Kermit Floor — SPC Floors, Walls and SkirtingsAccessed 2026-07-11Brodecor — NextStep SPC Wall PanelAccessed 2026-07-11Cập nhật
2026-07-11
Market ReferenceTuyên bố
This page presents a product and market opportunity. It is not investment advice or a final technical commitment. Final specifications, certification, warranty, lead time and pricing are governed by signed contracts and supplier documents.